The Rapid by tanning essentials Replacement, spray tan Spare gun,  this is a applicator spray gun to fit the Tanning Essentials Rapid Spray machine.
 
VERY IMPORTANT ESSENTIAL MAINTENANCE INFORMATION OF THE RAPID SPRAY GUN AND MACHINE
 
It is essential spray guns are cleaned after each sessions use, with professional systems to do this with the rapid place the spray gun on "c" setting and run warm (not hot/boiling water) through the spray gun for apprx 2 mins until the output is clear of tan, Failing to do this will result in spray tan drying out within the internal chamber of spray guns and once the solution starts to crystalise this will cause issues such as sporadic spraying, freckly output, and trigger sticking. 
 
Don't leave solution sat in the cups attached the gun remove solution after use this prolongs lifespan of the consumable pick up straw especially with solutions with alcohol content
As good practice daily after use secondary maintenance  internal spray gun clean is advised please see the internal parts and instructions below on how to complete this if training has not covered this area, or you have swooped from an older unit. 
 
 
Machine filter sponges must be cleaned reguarly as good practice daily after use, these are located on the underside of the machine. This is highly essential as this is a protector to stop airborne tan entering the motor this is essentially the air input to the unit also and the motor becomes suffocated as it cannot draw air in when filters are blocked. Blockages will then cause the motor to overwork and create excess heat and a host of issues in this scenario can arise such as damage to components such as gun and hose damages, and also motor damage. Never restrict airflow to the underside of the units.